Manufacturing is a Funny and Fickle Business

Trade Show Blog

classic_qualityManufacturing is a funny and fickle business. Products are designed, engineered, built, tested . . . then re-engineered, re-tested, and finally launched (hopefully to eager and admiring customers). Most companies do their best to get it right. They care about quality, especially on new products.

I’ve been in the trade show exhibit business long enough to have seen some oddities regarding product launches. I once worked for a company that introduced a new pop up that was an engineering masterpiece. I’m still in awe of the engineer who developed the self-locking hub. At the time, everyone, and I mean everyone, thought there were no new wrinkles in pop up displays. They were wrong. Everything about this pop up frame was remarkable . . . except for one thing:  the plastic. The engineer spec’d the wrong plastic and the brittle plastic broke within two or three months. The company bit the bullet however, despite having $50,000 in plastic parts, and modified the molds and re-ordered the parts with the correct plastic.

But what about existing products? For years there was a pop up manufacturer that sold a frame with plastic connectors. The connectors would break if you didn’t baby them. And rather than re-design the connectors, the manufacturer solved the problem by basically ignoring the real problem. Instead, whenever you bought a new pop up, they would include a repair kit which included additional connectors. I believe the term was “field repairable,” which meant that it was “field breakable.” Many companies expend all their energy on new product development and ignore existing products. After all, when it comes to existing products, it’s easy to blame the customer for not installing it correctly or not reading the instructions or simply not being satisfied with “good enough.”

You’re probably wondering if I have a point. Classic is not a “field repairable” or “good enough” company, at least I don’t think we are. But, we’re also not infallible. We sometimes make mistakes, but those mistakes are quickly rectified and then the solution is re-designed into future products.

For example, the Sacagawea Portable Hybrid Display has undergone several enhancements since its introduction about 10 months ago. We modified the base plates to make them lighter. In addition, we replaced hex key connections on the backwall with knobs to make the displays easier to set-up. Recently, we modified the horizontal spline connector, which makes the connection tighter and eliminates a small gap in the horizontal crossbar. I don’t know that anyone ever complained about it, but it bothered us and our Production Engineer came up with a slick and simple solution. We now use this solution for the Magellan Displays as well. I can’t show it to you (since I don’t want to give our competitors any ideas), but I will show you the result. See the photos below.

Modified Horizontal Crossbar on Sacagawea Hybrid Display

Modified Horizontal Crossbar on Sacagawea Hybrid Display

Now I’m generally not someone who likes to tell tales, but I do love a good story. Do you have any examples of products or solutions where you were told by the manufacturer that they were “good enough”? Or you were given a solution that wasn’t really a solution, but just a band-aid. How do you respond to that logic?

–Mel White

https://www.linkedin.com/in/melmwhite
mel@classicexhibits.com
Classic Exhibits Network (LinkedIn)

Filter by Category

Filter by Year

Recent Posts

Trade Show Tips to the Beat of the 2000s

It’s exhilarating and tiring, and by the end of the trade show, you are ready to escape. Your own bed, your family, your car, your pets, your routine — everything you want is at home. But before you take off, be sure to wrap things up right. Check all the small things before heading out.

Trade Show Tips to the Beat of the 1990s

As a smart marketer, you attend as many trade shows as you can, all while managing the day-to-day operations of your business. Eventually, you may feel as if you’ve been everywhere. You may question if another one is worth it.

Trade Show Tips to the Beat of the 1980s

What do customers want? It’s not complicated. They expect you’ll be good to them. How you respond makes all the difference, and saying and showing them that I’ll be good to you sets the right tone. However, even when you are paying attention and putting customers first, unexpected things can and will happen. Being human means that errors will occur.

Trade Show Tips to the Beat of the 1970s

Taking care of business means taking care of your customers. Giving them your time and attention and always being courteous. It can all be done — or at least started — at trade shows. You want your customers to look at your booth and think that nobody does it better.

Six Reasons to Blog in 202X

With the proliferation of video, blogging may seem quaint, even old fashion. And yet, we continue to post blogs 4-6 times per month. So, I asked Kris Asleson, the chief strategist at Flyrise (our SEO partner), why blogging is still important.

What is a Trade Show? A Guide for New Exhibitors.

What is a trade show? Trade Show, as a term, is often used interchangeably with other similar words like conventions, exhibitions, conferences, trade fairs, symposiums, and expos. And while they are similar, trade shows, and in particular professional trade shows, have a specific definition. 

Trade Show Tips to the Beat of the 1960s

Eventually, you will find yourself at a trade show in Las Vegas. Before you hit the road, make sure your booth is up to the magic moment.

It’s time to consider a new exhibit, new graphics, and an updated approach to your trade show marketing. If you are truly honest with yourself, you know the same old song won’t attract customers.

If Hotels Were Run Like Trade Shows

If Hotels Were Run Like Trade Shows. A guest approaches the reception desk at a hotel and says to the desk manager, “Hi. I’d like a room for a week, perhaps longer.”

The Complete Guide to Trade Show Services (Offsite & Onsite)

Onsite trade show services include all services available at the show site. Contractors typically provide these services for show management. Turnkey services are particularly valuable for first-time exhibitors, companies with limited internal resources, or those participating in numerous shows where efficiency and consistency are paramount.

Trade Show Tips to the Beat of the 1950s

What’s the biggest mistake that exhibitors make? They wing it rather than plan. It could happen to you. Maybe you don’t know what to expect, or you just need a refresher. Here is some friendly trade show marketing advice with a few entertaining music videos along the way. Enjoy!

What You Should Know about Trade Show Exhibit Budgeting

Companies should define a workable exhibit marketing budget, one that includes all related costs. However, the line between marketing expenses and exhibit marketing expenses can be somewhat fuzzy. You will want to create a well-defined budget that separates them.

The Top 10 Design Mistakes of Trade Show Graphics

You decided on your new trade show display . . . but you’re not done yet. Now, it’s time to design the graphics. You want AMAZING!. Below are 10 tips to consider when designing your next trade show graphics.

If Puppies Ran Trade Shows and Events

The following are 11 reasons why our lives would be better if puppies ran trade shows and events. To the ferret, goldfish, and lizard owners, you’re on your own.